Network Indoor Station Configuration Guide
Network Indoor Station Configuration Guide Legal Information About this Manual The Manual includes instructions for using and managing the Product. Pictures, charts, images and all other information hereinafter are for description and explanation only. The information contained in the Manual is subject to change, without notice, due to firmware updates or other reasons. Please find the latest version of this Manual at the Hikvision website ( http://overseas.hikvision.com/en/ ).
Network Indoor Station Configuration Guide INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, OR LOSS OF DATA, CORRUPTION OF SYSTEMS, OR LOSS OF DOCUMENTATION, WHETHER BASED ON BREACH OF CONTRACT, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY, OR OTHERWISE, IN CONNECTION WITH THE USE OF THE PRODUCT, EVEN IF HIKVISION HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR LOSS.
Network Indoor Station Configuration Guide Symbol Conventions The symbols that may be found in this document are defined as follows. Symbol Danger Caution Note Description Indicates a hazardous situation which, if not avoided, will or could result in death or serious injury. Indicates a potentially hazardous situation which, if not avoided, could result in equipment damage, data loss, performance degradation, or unexpected results.
Network Indoor Station Configuration Guide Contents 1 Local Operation .......................................................................................... 1 1.1 Activate Indoor Station ..................................................................................... 1 1.2 Configuration Settings ....................................................................................... 1 1.2.1 Set Indoor Station Network Parameters ................................................... 1 1.2.
Network Indoor Station Configuration Guide 2.4.1 System .................................................................................................... 20 2.4.2 Video Intercom ....................................................................................... 25 2.4.3 Network .................................................................................................. 32 2.5 Person and Card Management ........................................................................ 35 2.5.
Network Indoor Station Configuration Guide 1 Local Operation 1.1 Activate Indoor Station You can only configure and operate the indoor station after creating a password for the device activation. Steps 1. Power on the device. It will enter the activation page automatically. 2. Create a password and confirm it. 3. Tap OK to activate the indoor station.
Network Indoor Station Configuration Guide Two ways are available for you to set IP address: DHCP, and set IP address manually. 1. Tap Settings → → Configuration → to enter the network settings page. Note Enter activate password as the admin password. Figure 1-2 Network Settings 2. Enable DHCP, then the indoor station can search and get an IP address automatically. Note Skip the following steps if you have enabled DHCP. 3. Set the IP address manually. 1.2.
Network Indoor Station Configuration Guide Note • Rebooting the indoor station is required when you switch the SIP protocol between the private SIP protocol and the standard SIP protocol. • All linked device IP should be configured again after you change the SIP protocol type. • The indoor extension does not support SIP sever settings. 1.2.3 Set Linked Device IP Linked network parameters refers to the network parameters of devices (like door station, doorphone, master station, center, etc.
Network Indoor Station Configuration Guide Figure 1-3 Device Management (Private SIP) Figure 1-4 Device Management (Standard SIP) 2. Tap Main Door Station to pop up the device information dialog.
Network Indoor Station Configuration Guide Figure 1-5 Device Information Restore the door station via indoor station. Tap to restore the parameters of the door station. Sync Tap to synchronize the language of door station to indoor station. 3. Select the device to link. Edit the network parameters. 1.2.4 Set Indoor Station No. Indoor station No. and the indoor extension No. are numbers, which can be dialed by other devices to call the indoor station and the indoor extension in an intercom system.
Network Indoor Station Configuration Guide Figure 1-6 Set Indoor Station No. 2. Select Indoor Station to set the indoor station No. (Room No.) and the floor No. 3. Select Indoor Extension to set the indoor extension No. and the room name. 1.2.5 Add Camera Steps 1. Tap Settings → → Configuration → to enter the device management page. Note Default admin password is the activation password. 2. Tap + to pop up the dialog box.
Network Indoor Station Configuration Guide 3. Enter the device name and IP address. 4. Enter the password of the camera. 5. Tap OK to add the camera. 1.2.6 Zone and Alarm Settings Zone Settings You can set the zone type, alarm type and delay time and other parameters of 8 zones. Before You Start Tap Settings → → Preference to enable Alarm. Steps Note Arming status page and zone settings page are hidden by default. You should enable alarm function first. 1. Tap Settings → to enter the zone settings page.
Network Indoor Station Configuration Guide Note • 7 zone types are selectable: Panic Button, Door Magnetic, Smoke Detector, Active Infrared, Passive Infrared, Gas Detector, and Doorbell. • 3 alarm types are selectable: 24h Alarm, Instant Alarm, and Delay Alarm. Set the alarm type as 24h alarm, and the zone will be armed for 24h. Set the alarm type as instant alarm, and the zone will alarm once it's triggered.
Network Indoor Station Configuration Guide Figure 1-9 Arming Mode Settings 3. Arm the selected zone. Note • Zones are configurable on the arming mode page. • 24H alarm zone including smoke detector zone and gas detector zone will be triggered even if they are disabled. • Arming mode settings should be configured with the settings of arming status on the user page of the device. 1.
Network Indoor Station Configuration Guide Unlock Enter the unlock password and room No. on the door station to open the door. Arm/Disarm Create an arm/disarm password before configuring alarm parameters. Arm or disarm the zone for the indoor station by entering the arm/disarm password. Note Arm/Disarm settings page is hidden by default. Tap Settings → → Preference to enable Alarm, you can set the arm/disarm password.
Network Indoor Station Configuration Guide Figure 1-10 Sync Time 2. Enable Enable NTP. 3. Set the synchronizing interval, enter the IP address/domain of NTP server and port No., and select the time zone. Note The default unit of synchronizing interval is minute. 1.5 Sound Settings You can set the ringtone, ring duration, call forwarding time, volume of microphone and loudspeaker, enable/disable touch sound and auto-answer function on call settings page. Steps 1.
Network Indoor Station Configuration Guide Figure 1-11 Call Settings 2. Set corresponding parameters. Ringtone There are 3 ringtones by default, and you can custom and import at most 4 ringtones via Batch Configuration Tool or iVMS-4200 Client Software. Ring Duration: The maximum duration of indoor station when it is called without being accepted. Ring duration ranges from 30s to 60s.
Network Indoor Station Configuration Guide Steps 1. Tap Settings → page. → Configuration → to enter the restore default settings Figure 1-12 Restore Default Settings 2. Tap Restore Default Settings to restore the default settings and reboot the system. 3. Tap Restore All to restore all parameters and reboot the system. 1.7 System Maintenance You can format or install TF card, clear the screen, view the version information of the indoor station and reboot the system on the system maintenance page.
Network Indoor Station Configuration Guide Reboot Device Tap Reboot Device to reboot the system. Language Tap System Language to change the system language. Note The indoor station supports 11 languages. Brightness Adjustment Tap + or - to adjust the brightness. Figure 1-13 Brightness Adjustment Preference Tap Preference to enter the preference page. Enable Call Elevator and Alarm. Upgrade Device Tap Configuration → to enter the restore default settings page. Tap Upgrade to get the upgrade package.
Network Indoor Station Configuration Guide Do Not Disturb Tap Settings → to enter the call settings page. Tap Do Not Disturb to choose Close, All Day or Schedule. Note If you choose the Schedule, you should set the start time and end time. 1.8 Linked to the Mobile Client Steps 1. Tap Settings → → Hik-Connect Service to enter the settings page. Figure 1-14 Hik-Connect Server Settings 2. Enable Enable Hik-Connect Service. 3. Edit LBS Server and Verification Code.
Network Indoor Station Configuration Guide 2 Remote Operation via the client software The Video Intercom module provides remote control and configuration on video intercom products via the iVMS-4200 client software. 2.1 Activate Device Remotely You can only configure and operate the indoor station after creating a password for the device activation. Before You Start Default parameters of indoor station are as follows: • Default IP Address: 192.0.0.64. • Default Port No.: 8000.
Network Indoor Station Configuration Guide Device management includes device activation, adding device, editing device, and deleting device, and so on. After running the iVMS-4200, video intercom devices should be added to the client software for remote configuration and management. 2.2.1 Add Video Intercom Devices Steps Note • You can add at most 512 indoor stations and master stations in total to the client, and add at most 16 door stations to the client.
Network Indoor Station Configuration Guide Figure 2-1 Add the Device 4. Optional: Click Online Device, the active online devices in the same local subnet with the client software will be displayed on the Online Device area. Note To add online devices to the software, you are required to change the device IP address to the same subnet with your computer first. 1) You can click Refresh Every 60s to refresh the information of the online devices. 2) Select the devices to be added from the list.
Network Indoor Station Configuration Guide Edit a name for the device as you want. Address Input the device's IP address. The IP address of the device is obtained automatically in this adding mode. Port Input the device port No. The default value is 8000. User Name Input the device user name. By default, the user name is admin. Password Input the device password. By default, the password is 12345. 6. Optional: You can check the checkbox Export to Group to create a group by the device name.
Network Indoor Station Configuration Guide 2.3 System Configuration You can configure the video intercom parameters accordingly. Steps 1. Click Maintenance and Management → System Configuration → Acs and videoIntercom to enter the system configuration page. 2. Enter the required information. Ringtone Click ... and select the audio file from the local path for the ringtone of indoor station. Optionally, you can click for a testing of the audio file. Max.
Network Indoor Station Configuration Guide Device Information Click Device Information to enter device basic information page. You can view basic information (the device type, and serial No.), and version information of the device. Figure 2-2 Device Information General Click General to enter device general parameters settings page. You can view and edit the device name and device ID. Figure 2-3 General Time Click Time to enter the device time settings page.
Network Indoor Station Configuration Guide Figure 2-4 Synchronize Time Select Time Zone or Enable NTP. Click Save to save the time settings. • Time Zone • Select a time zone from the drop-down list menu. • Click Synchronization. • NTP • Check the checkbox of Enable NTP to enable NTP. • Enter the server address, NTP port, and synchronization interval. • DST • Check the checkbox of Enable DST to enable DST. • Enter the start time and end time of DST, and set the DST bias. Note The default port No. is 123.
Network Indoor Station Configuration Guide Figure 2-5 System Maintenance • Click Reboot and the system reboot dialog box pops up. Click Yes to reboot the system. • Click Restore Default Settings to restore the default parameters. • Click Restore All to restore all parameters of device and reset the device to inactive status. Note • Click Restore Default Settings, all default settings, excluding network parameters, will be restored.
Network Indoor Station Configuration Guide • Click ... to select the upgrade file and click Upgrade to remote upgrade the device. The process of remote upgrade will be displayed in the process bar. • Select a language, and click Save to change the device system language. Note • The device supports 11 languages: English, Russian, German, Italian, French, Portuguese, Spanish, Turkish, Arabic, Polish, and Vietnamese. • Rebooting the device is required after you change the system language.
Network Indoor Station Configuration Guide RS-485 Click RS485 to enter the RS-485 settings page. You can view and edit the RS-485 parameters of the device. Figure 2-7 RS-485 Settings Note For indoor station and master station, there are 3 choices for the working mode: transparent channel, disable, and custom. 2.4.
Network Indoor Station Configuration Guide Figure 2-8 ID Configuration 2. Select the device type from the drop-down list, and set the corresponding information. 3. Click Save to enable the device number configuration. Time Parameters Steps 1. Click Time Parameters to enter time parameters settings page. Figure 2-9 Time Parameters 2. Configure the maximum ring duration, maximum live view time, and call forwarding time. 3. Click Save.
Network Indoor Station Configuration Guide • Call forwarding time refers to the ring duration limit beyond which the call is automatically forwarded to the mobile phone designated by the resident. The range of call forwarding time varies from 0s to 20s. • For indoor extension, it only requires setting the maximum live view time. Permission Password Click Permission Password to enter password changing page.
Network Indoor Station Configuration Guide 2. Select a zone type from the drop-down list menu. 3. Select an alarm mode from the drop-down list menu. 4. Set the zone status: NO or NC. 5. Set the entering delay, and exiting delay. 6. Select triggers. 7. Click Save to enable zone settings. Note • 7 zone types are supported: Emergency Switch, Door Magnetic Switch, Smoke Detector, Active IR Detector, Passive IR Detector, Combustible Gas Detector, and DoorBell Switch.
Network Indoor Station Configuration Guide Add Camera Steps 1. Click IP Camera Information to enter IP camera information page. Figure 2-12 IP Camera Information 2. Click Add to pop up the device adding dialog box. 3. Enter corresponding information (device name, IP address, port No., user name, password, etc.), and click OK. Note Indoor extension does not support this function. Export and Import Added Device Information Steps 1. Click Export to export the added device information file. 2.
Network Indoor Station Configuration Guide Figure 2-13 Import Added Device Information Volume Input and Output Steps 1. Click Volume Input/Output to enter the volume input and output page. Figure 2-14 Volume Input and Output 2. Slide the slider to adjust the volume input, volume output and talk volume. 3. Click Save to enable the settings. Ring Import Steps 1. Click Ring Import to enter the ring configuration page.
Network Indoor Station Configuration Guide Figure 2-15 Ring Import 2. Click + to add the ring, and click x to delete the imported ring. Note • The ring to be imported should be in the wav format, and the size of the ring cannot be larger than 300k. • Up to 4 rings can be added. Deploy Info Click Deploy Info, you can get the deploy informations. Figure 2-16 Deploy Info SIP Protocol Settings Click Intercom Protocol to enter the SIP settings page.
Network Indoor Station Configuration Guide Incoming Call Linkage Steps 1. Click Incoming Call Linkage to enter configuration the page. Figure 2-18 Incoming Call Linkage 2. Enable and select triggers. When the calling incoming, the alarm you linked will be triggered. 2.4.3 Network Local Network Configuration Steps 1. Click Local Network Configuration to enter local network configuration page.
Network Indoor Station Configuration Guide Figure 2-19 Local Network Configuration 2. Enter the local IP address, subnet mask, gateway address, and port No. 3. Click Save to enable the settings. Note • The default port No. is 8000. • After editing the local network parameters of device, you should add the devices to the device list again.
Network Indoor Station Configuration Guide Figure 2-20 Linked Network Configuration 2. Enter the master station IP address, (main) door station IP address, SIP server IP address, management center IP address, and doorphone IP address. 3. Select the main door station type from the drop-down list. 4. Click Save to enable the settings. Note • After adding master station IP Address, the linkage between indoor station and master station can be realized.
Network Indoor Station Configuration Guide Click Advanced Settings to enter DNS address settings page. Edit the IP address and click Save. Figure 2-21 DNS Settings Configure Mobile Client Connection Configure Hik-Connect server parameters before viewing videos via mobile client. Before You Start Make sure the indoor station connects to the network. Steps 1. Click Hik-Connect to enter configuration page. 2. Enable Enable Hik-Connect Access. 3. Enable Custom and edit Service Address 4.
Network Indoor Station Configuration Guide Figure 2-22 PersonalManagement Application The page is divided into two parts: Organization Management and Person Management. Organization Management You can add, edit, or delete the organization as desired. Person Management After adding the organization, you can add the person to the organization and issue card to persons for further management. 2.5.
Network Indoor Station Configuration Guide Note Up to 10 levels of organizations can be created. Modify and Delete Organization You can select the added organization and click to modify its name. You can select an organization, and click X button to delete it. Note • The lower-level organizations will be deleted as well if you delete an organization. • Make sure there is no person added under the organization, or the organization cannot be deleted. 2.5.
Network Indoor Station Configuration Guide 2) Optional: Click Add Face to upload the photo. Note The picture should be in *.jpg format. Click Upload Select the person picture from the local PC to upload it to the client. Click Take Phone Take the person's photo with the PC camera. Click Remote Collection Take the person's photo with the collection device. 3. Issue the card for the person. 1) Click Credential → Card . 2) Click + to pop up the Add Card dialog. 3) Select Normal Card as Card Type.
Network Indoor Station Configuration Guide 4) Click OK to start exporting. 2. Importing Person: You can import the Excel file with persons information in batch from the local PC. 1) Click Import Person. 2) You can click Download Template for Importing Person to download the template first. 3) Input the person information to the downloaded template. 4) Click ... to select the Excel file with person information. 5) Click OK to start importing.
Network Indoor Station Configuration Guide Select the person and click Edit to open the editing person dialog. To delete the person, select a person and click Delete to delete it. Note If a card is issued to the current person, the linkage will be invalid after the person is deleted. Change Person to Other Organization You can move the person to another organization if needed. Steps 1. Select the person in the list and click Change Organization. 2. Select the organization to move the person to. 3.
UD15813B
