User Manual

2 Remote Operaon via the client
soware
The Video Intercom module provides remote control and conguraon on video
intercom products via the iVMS-4200 client
soware.
2.1 Acvate Device Remotely
You can only congure and operate the indoor staon aer creang a password for
the device acvaon.
Before You Start
Default parameters of indoor staon are as follows:
•
Default IP Address: 192.0.0.64.
•
Default Port No.: 8000.
•
Default User Name: admin.
Steps
1.
Run the client soware, enter Device Management, check the Online Device
area.
2.
Select an
inacvated device and click the Acvate.
3.
Create a password, and conrm the password.
Note
We highly recommend you to create a strong password of your own choosing
(using a minimum of 8 characters, including at least three kinds of following
categories: upper case leers, lower case leers, numbers, and special
characters) in order to increase the security of your product. And we
recommend you reset your password regularly, especially in the high security
system,
reseng the password monthly or weekly can beer protect your
product.
4.
Click OK to acvate the device.
2.2 Device Management
Network Indoor Staon Conguraon Guide
16