User Manual

3.
Enter the device name and IP address.
4.
Enter the password of the camera.
5.
Tap OK to add the camera.
1.2.6 Zone and Alarm Sengs
Zone Sengs
You can set the zone type, alarm type and delay me and other parameters of 8
zones.
Before You Start
Tap
Sengs → → Preference to enable Alarm.
Steps
Note
Arming status page and zone sengs page are hidden by default. You should enable
alarm funcon rst.
1.
Tap Sengs → to enter the zone sengs page.
Figure 1-8 Zone Sengs
2.
Press a zone to pop up the zone eding dialogue box.
3.
Set the zone type, alarm type, status of arming status, entering delay, and exing
delay.
4.
Tap OK to save the sengs.
Network Indoor
Staon Conguraon Guide
7