Quick Start Guide

1 Geng Started
1.1 Acvate Indoor Staon
You can only congure and operate the indoor staon aer creang a password for
the device acvaon.
Steps
1.
Power on the device. It will enter the acvaon page automacally.
2.
Create a password and conrm it.
3.
Tap OK to acvate the indoor staon.
Note
We highly recommend you to create a strong password of your own choosing
(using a minimum of 8 characters, including at least three kinds of following
categories: upper case leers, lower case leers, numbers, and special
characters) in order to increase the security of your product. And we
recommend you reset your password regularly, especially in the high security
system,
reseng the password monthly or weekly can beer protect your
product.
1.2 Quick Operaon
Aer device acvaon, the wizard page will pop up.
Steps
1.
Choose Language and tap Next.
2.
Set network parameters and tap Next
-
Edit Local IP, Subnet Mask and Gateway parameters.
-
Enable DHCP, the device will get network parameters automacally.
Network Indoor
Staon Quick Start Guide
1