Operation Manual
Table Of Contents
- 1 Overview
- 2 Appearance
- 3 Typical Application
- 4 Terminals and Interfaces
- 5 Installation and Wiring
- 6 Before You Start
- 7 Local Operation
- 8 Remote Operation via Batch Configuration Tool
- 9 Remote Operation via iVMS-4200
- 10 Accessing via Hik-Connect Mobile Client Software
- Appendix
Video Intercom Indoor StationยทUser Manual
68
8.5.2 Setting Indoor Station
Purpose:
You can activate the online indoor station, and configure the room No. for the online
indoor station.
Steps:
1. Press the Indoor Station tab to switch to the indoor station configuration interface.
Figure 8-37 Setting Indoor Station
2. Select a community, and enter the indoor station start IP address, and then click the
Calculate button to generate the indoor station end IP address and indoor station
room No. (like 1-1-1-1-2) automatically.
3. Set the main door station parameters: door station type (door station for unit, or door
station for villa), main door station IP address.
4. Set the linked network parameters for the indoor station: SIP IP address, master
station IP address, center IP address, center port No., subnet mask, and gateway
address.
5. Select an online door station, enter the login password, and click the Set button.