Operation Manual
Table Of Contents
- 1 Overview
- 2 Appearance
- 3 Typical Application
- 4 Terminals and Interfaces
- 5 Installation and Wiring
- 6 Before You Start
- 7 Local Operation
- 8 Remote Operation via Batch Configuration Tool
- 9 Remote Operation via iVMS-4200
- 10 Accessing via Hik-Connect Mobile Client Software
- Appendix
Video Intercom Indoor Station·User Manual
35
Figure 7-10 Center/Master Station Adding Interface (Indoor Station)
3. Entering the IP address of center or the master station, and press the tab to save
the settings.
After setting center or the master station in the indoor station, the alarm messages
will be uploaded to the center or the master station automatically.
You can edit but not delete the center or the master station in the device
management interface.
Connecting Main Door Station
Steps:
1. Get to the device interface: Settings -> Configuration -> Device.
2. Press the Main Door Station tab to pop up the device information dialogue box.