Operation Manual
Table Of Contents
- 1 Overview
- 2 Appearance
- 3 Typical Application
- 4 Terminals and Interfaces
- 5 Installation and Wiring
- 6 Before You Start
- 7 Local Operation
- 8 Remote Operation via Batch Configuration Tool
- 9 Remote Operation via iVMS-4200
- 10 Accessing via Hik-Connect Mobile Client Software
- Appendix
Video Intercom Indoor Station·User Manual
33
Only DS-KH8301-WT, and DS-KH8301-WTS require setting the video standard, and the
system will reboot after selecting video standard.
The maximum live view duration varies from 10 seconds to 60 seconds.
Setting Network
Purpose:
Network connection is mandatory for the use of the indoor station.
Steps:
1. Get to the configuration interface: Settings > Configuration, and enter the admin
password (configuration password).
2. Press the Network tab to enter the network settings interface.
Figure 7-8 Network Interface
3. Press the tab to pop up network settings dialogue box.
Figure 7-9 Setting Network
4. Enter a local IP address, subnet mask, and gateway.
5. Press the tab to save the settings.