Operation Manual
Table Of Contents
- 1 Overview
- 2 Appearance
- 3 Typical Application
- 4 Terminals and Interfaces
- 5 Installation and Wiring
- 6 Before You Start
- 7 Local Operation
- 8 Remote Operation via Batch Configuration Tool
- 9 Remote Operation via iVMS-4200
- 10 Accessing via Hik-Connect Mobile Client Software
- Appendix
Video Intercom Indoor Station·User Manual
31
4. Press the Reboot tab to reboot the system.
Figure 9-13 System Maintenance Interface
Only DS-KH8301-WTS/DS-KH8300-T/DS-KH8301-WT indoor stations support TF card
function.
After enabling Clear Screen function, press and hold the Unlock key ( ) to exit the
clear screen mode.
7.3.7 Configuration Settings
Purpose:
On the configuration settings interface, you can set and view the local information,
configure the network, manage devices, synchronize the device time, and restore the
default settings.
Setting Local Information
Steps:
1. Get to the configuration interface: Settings > Configuration, and enter the admin
password (configuration password).
2. Press the Local Info tab, and select the indoor station type: Indoor Station, or Indoor
Extension.
Indoor Station: Set the Room No.
Indoor Extension: Set the Extension No., and set a room name.