Operation Manual

Video Intercom Indoor Station·User Manual
23
Figure 9-3 Pressing Disarm Tab
2. Press the Disarm tab.
3. Enter the disarm password to enable the disarming status.
4. (Optional) Press a scene mode icon, and enter the disarm password to change the
scene mode of the indoor station.
 Only one mode of arming can be set at one time. When you set another mode of
arming status, the former one is disarmed automatically.
 If enabling the arming status successfully, you can hear a voice prompt “armed”, and
the corresponding arming status will display on the main interface.
 If enabling the disarming status successfully, you can hear a voice prompt “disarmed”,
and the corresponding disarming status will display on the main interface.
 The DS-KH6210-L indoor station does not support this function.
7.3 Indoor Station Settings
Purpose:
On the settings interface, you can set passwords (admin password, duress code, unlock
password, and arm/disarm password), set the device sound, set no disturbing schedule,
set the arming mode and zone, perform the system maintenance, set the configuration
settings, and view the device information.
7.3.1 Password Settings
Purpose:
 You can edit the admin password (configuration password), duress code, unlock
password and arm/disarm password of the indoor station.
 You can edit the admin password (configuration password) and arm/disarm password
of the indoor extension.
 Enter admin password when configuring key parameters.