Operation Manual

Figure 2-8 Call Elevator
2.
Tap
on the home page of the indoor staon to start calling the elevator.
3.
When the device communicates with door staon, tap unlock icon to start calling
the elevator.
2.7 Relay
Sengs
Aer you set the output parameters and display the relay buon on the main page,
you can control the relay manually.
Steps
1.
Tap Sengs → → Output Sengs and disable Hide on Main Page funcon.
2.
Back to the main page and tap .
3.
Select a relay to enable or disable, the control device will start/stop working.
2.8
Informaon Management
You can view public noce, visitor message, alarm log and capture log on
informaon management page.
Tap Message on the home page to enter the
informaon management page. (Here
takes the alarm log page as an example.)
Video Intercom Indoor
Staon Operaon Guide
10