Configuration Manual

Note
•
The new password and conrm password should be idencal.
•
Aer eding the password of device, click refresh buon from the
device list, the added device will not be there. You should add the device
again with new password to operate the remote conguraon.
RS-485
Click RS485 to enter the RS-485 sengs page. You can view and edit the
RS-485 parameters of the device.
Figure 3-7 RS-485 Sengs
Note
For indoor staon and main staon, there are 3 choices for the working
mode: transparent channel, disable, and custom.
Security
Click Security to enter the page. You can enable SSH or enable HTTPS on this
page.
Click Save
aer conguraon.
Video Intercom Indoor
Staon Conguraon Guide
30