Operation Manual
Table Of Contents
- 1 Overview
- 2 Appearance
- 3 Typical Application
- 4 Terminals and Interfaces
- 5 Installation and Wiring
- 6 Before You Start
- 7 Local Operation
- 8 Remote Operation via Batch Configuration Tool
- 9 Remote Operation via iVMS-4200
- 10 Accessing via Hik-Connect Mobile Client Software
- Appendix

Video Intercom Indoor StationยทUser Manual 
v 
Do not aim the device at the sun or extra bright places. A blooming or smear may occur 
otherwise (which is not a malfunction however), and affecting the endurance of sensor 
at the same time. 
Please use the provided glove when open up the device cover, avoid direct contact with 
the device cover, because the acidic sweat of the fingers may erode the surface coating 
of the device cover. 
Please use a soft and dry cloth when clean inside and outside surfaces of the device 
cover, do not use alkaline detergents. 
Please keep all wrappers after unpack them for future use. In case of any failure 
occurred, you need to return the device to the factory with the original wrapper. 
Transportation without the original wrapper may result in damage on the device and 
lead to additional costs. 
Improper use or replacement of the battery may result in hazard of explosion. Replace 
with the same or equivalent type only. Dispose of used batteries according to the 
instructions provided by the battery manufacturer. 










