Operation Manual
Table Of Contents
- 1 Overview
- 2 Appearance
- 3 Typical Application
- 4 Terminals and Interfaces
- 5 Installation and Wiring
- 6 Before You Start
- 7 Local Operation
- 8 Remote Operation via Batch Configuration Tool
- 9 Remote Operation via iVMS-4200
- 10 Accessing via Hik-Connect Mobile Client Software
- Appendix
Video Intercom Indoor Station·User Manual
41
1. Press the tab on the touch screen to enter the residents calling
interface.
2. Enter the corresponding resident’s Room No..
3. Press the tab to start an audiovisual call.
4. Press the tab to stop the audiovisual call.
Generally speaking, Room No. format should be like 1-2-3-405 as Community 1,
Building 2, Unit 3, and Room 405. The community No. can be omitted.
Switch to on the upper right corner to enable the camera function.
The Room No. can be automatically saved into the contact list.
Indoor extension does not support this function.
On the call resident interface of DS-KH6210-L, there is no Contact List, Call Elevator,
or Call Center tab.
Figure 7-13 Call Resident Interface
7.4.3 Calling Management Center
2 options are selectable to call management center.
Option 1:
Press the tab on the main interface of the indoor station.
Option 2: