Operation Manual

Video Intercom Indoor Station·User Manual
34
 Enable DHCP function to obtain an IP address automatically.
 Enable Same LAN function if indoor stations and indoor extensions are in the same
local area network with other video intercom devices in a community, or the indoor
extensions will not work normally.
Setting the SIP Server
Purpose:
To realize the connection between the indoor station and the management center
(master station), the indoor station should connect to a SIP server in advance.
Steps:
1. Get to the device management interface: Settings -> Configuration -> Device.
2. Press the SIP Sever tab, and enter the IP address of the SIP server.
3. Press the tab to save the SIP server added.
 The master station can work as a SIP server.
 Indoor extension cannot connect to the SIP server.
Adding Devices
Purpose:
The indoor station never works alone. You can connect the main door station, IP camera,
SIP server, management center, master station, DVR/DVS/NVR, and so on. Once
connected, those devices can work together as a whole video intercom system.
 The DS-KH6210-L indoor station does not support adding IP camera, DVR/DVS/NVR,
or doorphone.
 Indoor Extension only supports adding indoor station.
 Setting Center/Master Station (Optional)
Steps:
1. Get to the device interface: Settings -> Configuration -> Device.
2. Press the Center or Master Station tab to pop up the device information dialogue
box.