Operation Manual
Table Of Contents
- 1 Overview
- 2 Appearance
- 3 Typical Application
- 4 Terminals and Interfaces
- 5 Installation and Wiring
- 6 Before You Start
- 7 Local Operation
- 8 Remote Operation via Batch Configuration Tool
- 9 Remote Operation via iVMS-4200
- 10 Accessing via Hik-Connect Mobile Client Software
- Appendix
Video Intercom Indoor Station·User Manual
24
Enter duress code in the door station when the user is hijacked.
Enter unlock password in the door station when opening door of the building.
Enter arm/disarm password when arming/disarming the zone.
Steps:
1. Press the Settings tab on the touch screen to enter the password settings interface.
Figure 9-4 Password Settings Interface (Indoor Station)
Figure 9-5 Password Settings Interface (Indoor Extension)
2. Press the Admin Password tab, Duress Code tab, Unlock Password tab, or
Arm/Disarm Password tab to enter corresponding interfaces.
3. Press the Edit tab to pop up the password changing dialogue box.