User Manual

3.
Click Add, and set corresponding parameters. and Password of the Wi-Fi.
1) Enter the SSID.
2) Select Working Mode.
3) Select Encrypon Type.
4) Click OK.
5)
Oponal: Click Refresh to get the present informaon.
4.
Click Network
Sengs, and set corresponding parameters.
5.
Select Security Mode.
6.
Click Connect.
SIP Seng
Steps
1.
Click Network → Basic Sengs → SIP to enter the sengs page.
Figure 4-6 SIP Sengs
2.
Check Enable VOIP Gateway.
3.
Congure the SIP parameters.
4.
Click Save to enable the sengs.
FTP
Sengs
Module Door Staon User Manual
62