Configuration Manual

2) Oponal: Click Upload Picture to select the person picture from the local PC
to upload it to the client.
Note
The picture should be in *.jpg format.
3) Oponal: You can also click Take Phone to take the person's photo with the
PC camera.
3.
Set linked device for the person.
1) Click Details.
Figure 1-30 Details
2) Set the linked devices.
Linked Device
You can bind the indoor staon to the person.
Note
If you select Analog Indoor Staon in the Linked Device, the Door Staon
eld will display and you are required to select the door staon to
communicate with the analog indoor staon.
Room No.
You can enter the room No. of the person.
3) Click OK to save the
sengs.
4.
Issue the card for the person.
1) Click Card.
Module Door
Staon Conguraon Guide
24