User Manual

Figure 2-33 Placement of Lines
6.
Connect the cables.
1) Connect the lines and
module-connecng line 1 to the corresponding
interfaces of the main unit, then place the main unit into the upper grid.
2) Connect the other end of the module-connecng line 1 to the input interface
of the sub module. Connect two sub modules via module-connecng line 2.
3) Organize the cables with cable e in the package. The suggested cable
connecon picture as shown below.
Figure 2-34 Line Connecon Eect Picture
7.
Insert the modules into the frame aer wiring. The main unit must be placed in
the top grid.
Module Door
Staon User Manual
33