Operation Manual

Video Intercom Vandal-Resistant Door Station·User Manual
58
Figure 8-23 Volume Configuration
2. Slide the slider to adjust the volume input and volume output.
3. Click Save to enable the settings.
Call Button
Steps:
1. Click Video Intercom -> Call Button to enter the call button settings interface.
Figure 7-1 Call Button Settings Interface
2. Check the checkbox of Quick Press for Calling Center.
3. Click Save to enable the settings.
Note: If enabling Quick Press for Calling Center, you should call resident by holding
down the call button, and call center by quickly pressing the call button.
Motion Detection
Purpose:
Motion detection detects the moving objects in the configured surveillance area, and a
series of actions can be taken when the alarm is triggered.
Motion detection configuration adopts the same set of motion detection parameters in
the daytime and at night.
Task 1: Set the Motion Detection Area
Steps:
1. Click Video Intercom -> Motion Detection to enter the motion detection settings
interface.