Operation Manual

Video Intercom Vandal-Resistant Door Station·User Manual
57
Note: This function only applies to door stations, except for the doorphone.
IO Input and Output
IO input/output refers to the Alarm In terminal and the Alarm Out terminal. You can
connect external devices to the door station via these terminals. The door station has 1
Alarm In terminal (AI), and 1 Alarm Out terminal (NO/COM/NC).
Steps:
1. Click Video Intercom -> IO Input and Output to enter the IO input and output
interface.
Figure 8-22 IO Input/Output Configuration
2. Set the input mode: Disabled, Exit Button, Door Status, Custom.
Disabled: The function of the AI terminal is disabled.
Exit Button: The AI terminal supports connecting to the exit button.
Door Status: The AI terminal supports connecting to the door magnetic.
Custom: It is reserved.
3. Set the output mode: Disabled, Electric Lock, Custom.
Disabled: The function of the NO/NC/COM terminal is disabled.
Electric Lock: The NO/NC/COM terminal supports connecting to the electric lock
(electric strike, and magnetic lock).
Custom: It is reserved.
4. Click Save to enable the settings.
Volume Input and Output
Steps:
1. Click Video Intercom -> Volume Input/Output to enter the volume input and output
interface.