Operation Manual

Video Intercom Vandal-Resistant Door Station·User Manual

Figure 8-12 Time Settings

2. Select Time Zone or Enable NTP.

 Time Zone

1) Select a time zone from the drop-down list menu.

2) Click the Synchronization button.

 NTP

1) Check the checkbox of Enable NTP to enable NTP.

2) Input the server address, NTP port, and synchronization interval.

 DST

1) Check the checkbox of Enable DST to enable DST.

2) Input the start time and end time of DST, and set the DST bias.

3. Click Save to save and realize the time settings.

Note: The default port No. is 123.

System Maintenance

Purpose:

You can operate the system management and remote upgrading on the system

maintenance interface.

Steps:

1. Click System –> System Maintenance to enter the system maintenance interface.