Operation Manual

Video Intercom Vandal-Resistant Door Station·User Manual
49
You can add many devices at once whose IP addresses are among the IP segment.
Steps:
1. Click to pop up the adding devices dialog box.
Figure 8-7 Click Adding Button
2. Select IP Segment in the adding mode drop-down list.
3. Set the Start IP Address and End IP Address.
4. Input port No., user name, and password.
Figure 8-8 Adding by IP Segment
5. Click OK to search and add the devices whose IP addresses are within the range of the
defined IP segment to the device list.
8.3 Configuring Devices Remotely
In the device list area, select a device and click or to enter
the remote configuration interface.
Figure 8-9 Remote Configuration
Note: The icon appears by hovering the mouse over a piece of device information.
8.3.1 System
Click System on the remote configuration interface to display the device information:
Device Information, General, Time, System Maintenance, and User, and so on.