Operation Manual

Video Intercom Vandal-Resistant Door Station·User Manual
47
Note:
 The default port No. is 8000.
 After editing the network parameters of device, you should add the devices to the
device list again.
8.2 Adding Device
Before you start:
Make sure the device to be added has been activated.
Purpose:
To configure the activated device via batch configuration tool and iVMS-4200 client
software remotely, you should add the device to the tool or the software firstly.
3 ways for adding the device are supported: adding active online devices within your
subnet, adding device by IP address, and adding device by IP segment.
8.2.1 Adding Online Device
Before you start:
Make sure the device to be added is in the same subnet with your computer. Otherwise,
please edit network parameters first.
Steps:
1. Select an active online device or hold the Ctrl or Shift key to select multiple devices in
the online devices list.
Figure 8-3 Online Devices Interface
2. Click to pop up the login dialog box.
Figure 8-4 Login Dialog Box