Manualshelf

Operation Manual

ManualsBrandsHikvision ManualsIntercomsDS-KB8112
51525354555657585960
Video Intercom Vandal-Resistant Door StationยทUser Manual
46
8 Remote Operation via Batch
Configuration Tool
Purpose:
You can operate configure the device remotely via the Batch Configuration Tool. Before
operating and configuring the device via the Batch Configuration Tool, you should
activate the device first. For detail information about activation, please refer to 5
Activating Door Station.
8.1 Editing Network Parameters
Purpose:
To operate and configure the device via LAN (Local Area Network), you need connect the
device in the same subnet with you PC. You can edit network parameters via batch
configuration tool, and iVMS-4200 client software. Here take editing network
parameters via batch configuration tool as example.
Steps:
1. Select an online activated device and click Edit NET Parameters.
Figure 8-1 Click Edit NET Parameters Button
2. Change the device IP address and gateway address to the same subnet with your
computer. Or enable DHCP to get the IP address automatically.
3. Input the password and click OK to activate the network parameters modification.
Figure 8-2 Edit Network Parameters