Operation Manual

Video Intercom Vandal-Resistant Door Station·User Manual
44
Figure 7-32 Linkage Method Settings
Notify Surveillance Center: Send an exception or alarm signal to remote
management software when an event occurs.
Send Email: Send an email with alarm information to a user or users when an
event occurs.
Note: To send the Email when an event occurs, please refer to Section 5.3.8 to
complete Email setup in advance.
Upload to FTP: Capture the image when an alarm is triggered and upload the
picture to the configured FTP server.
Notes: Set the FTP address and the remote FTP server first. Refer to Section 5.3.7
Configuring FTP Settings for detailed information.
Alarm Uploading
Purpose:
Delayed door alarm will be triggered when the door is unlocked beyond the
door-unlocked duration.
Steps:
1. Enter the alarm uploading settings interface: Configuration > Event > Basic Event >
Alarm Uploading.