Operation Manual

Video Intercom Vandal-Resistant Door Station·User Manual
36
Directory: In the directory structure, you can select the root directory, parent
directory and child directory.
Anonymous Access to the FTP Server (The user name and password won’t be
required.): Check the checkbox of Anonymous to enable the anonymous access to
the FTP server.
Note: The anonymous access function must be supported by the FTP server.
4. Click Save to save the settings.
Email Settings
Purpose:
The system can be configured to send an Email notification to all designated receivers if
an alarm event is detected, e.g., motion detection event.
Before you start:
Please configure the DNS Server settings under Configuration > Network > Basic
Settings > TCP/IP before using the Email function.
Steps:
5. Enter the TCP/IP Settings (Configuration > Network > Basic Settings > TCP/IP) to set
the IPv4 Address, IPv4 Subnet Mask, IPv4 Default Gateway and the Preferred DNS
Server.
Note: Please refer to Configuring TCP/IP Settings for detailed information.
6. Enter the Email Settings interface: Configuration > Network >Advanced Settings >
Email.
Figure 7-23 Email Settings