Operation Manual

Video Intercom Vandal-Resistant Door Station·User Manual
13
5.2 Activation via Batch Configuration Tool
Steps:
1. Run the Batch Configuration Tool.
Figure 5-2 Select Inactive Device
2. Select an inactivated device and click Activate.
Figure 5-3 Activation Interface (Batch Configuration Tool)
3. Create a password, and confirm the password.
STRONG PASSWORD RECOMMENDED– We highly recommend you create a
strong password of your own choosing (Using a minimum of 8
characters, including at least three of the following categories:
upper case letters, lower case letters, numbers, and special
characters.) in order to increase the security of your product. And we
recommend you reset your password regularly, especially in the high security
system, resetting the password monthly or weekly can better protect your
product.
4. Click OK to activate the device.
Note:
 When the device is not activated, the basic operation and remote operation of device
cannot be performed.