Operation Manual

Video Intercom Vandal-Resistant Door Station·User Manual
12
5 Activating Door Station
Purpose:
You are required to activate the device first by setting a strong password for it before
you can use the device.
Activation via Batch Configuration Tool, Activation via Web Browser, and activation via
iVMS-4200 client software are supported.
5.1 Activation via Web Browser
Steps:
1. Power on the device, and connect the device to the network.
2. Input the default IP address to the address bar of the web browser, and click Enter to
the activation interface.
Figure 5-1 Activation Interface (Web)
3. Create a password, and confirm the password.
STRONG PASSWORD RECOMMENDED– We highly recommend you create a
strong password of your own choosing (Using a minimum of 8
characters, including at least three of the following categories:
upper case letters, lower case letters, numbers, and special
characters.) in order to increase the security of your product. And we
recommend you reset your password regularly, especially in the high security
system, resetting the password monthly or weekly can better protect your
product.
4. Click OK to activate the device.
Note: The device default IP address is 192.0.0.65.