User Manual

By default, the device me should be synchronized manually. You can set the device me
manually or check Sync. with Computer Time to synchronize the device me with the
computer's me.
8.5.4 Set DST
Steps
1. Click
Conguraon → System → System Sengs → DST .
Figure 8-4 DST Page
2.
Check Enable DST.
3. Set the DST start
me, end me and bias me.
4. Click Save to save the sengs.
8.5.5 View Open Source
Soware License
Go to Conguraon → System → System Sengs → About Device , and click View Licenses to
view the device license.
8.5.6 Upgrade and Maintenance
Reboot device, restore device parameters, and upgrade device version.
Reboot Device
Click Conguraon → System → Maintenance → Upgrade & Maintenance .
DS-K5671-3XF Series Face Recognion Terminal User Manual
63