User Manual

Table Of Contents

Import Person Pictures

Aer imporng face pictures for the added persons to the client, the persons in the pictures can be

idened by an added face recognion terminal. You can either import person pictures one by

one, or import mulple pictures at a me according to your need.

Before You Start

Be sure to have imported person informaon to the client beforehand.

Steps

1. Enter the Person module.

2. Select an added

organizaon in the list, or click Add in the upper-le corner to add an

organizaon and then select it.

3. Click Import to open the Import panel and check Face.

Oponal: Enable Verify by Device to check whether face recognion device managed in the

client can recognize the face in the photo.

5. Click to select a face picture le.

Note

• The (folder of) face pictures should be in ZIP format.

• Each picture

le should be in JPG format and should be no larger than 200 KB.

• Each picture

le should be named as "Person ID_Name". The Person ID should be the same

with that of the imported person informaon.

Click Import to start imporng.

The imporng progress and result will be displayed.

Export Person

Informaon

You can export the added persons' informaon to local PC as a CSV/Excel le.

Before You Start

Make sure you have added persons to an organizaon.

Steps

1. Enter the Person module.

Oponal: Select an organizaon in the list.

Note

All persons' informaon will be exported if you do not select any organizaon.