User Manual

You can select display theme for device authencaon. You can select Display Mode as Simple
or Normal. When you select Simple, the informaon of name, ID, face picture will be not
displayed.
Sleep
Enable Sleep and the device will enter the sleep mode when no operaon within the congured
sleep me. Aer enabling Sleep, you need set the start me of display.
8.5.23 Temperature Measurement Sengs
Temperature Measurement Sengs
You can set the temperature measurement parameters, including temperature measurement only,
temperature unit, over-temperature threshold, temperature compensaon, door not open when
temperature is abnormal, etc.
Steps
1. Click Conguraon → Temperature → Temperature Sengs .
Figure 8-17 Temperature Measurement Sengs
2. Enable Temperature Measurement.
3. Congure the temperature measurement parameters.
DS-K5671-3XF Series Face Recognion Terminal User Manual
90