User Manual

You can check Face Picture, Name, Employee ID and Temperature, to display the authencaon
result.
Picture Uploading and Storage
Upload Captured Picture When Authencang
Upload the pictures captured when authencang to the plaorm automacally.
Save Captured Picture When Authencang
If you enable this funcon, you can save the picture when authencang to the device.
Save Registered Picture
The registered face picture will be saved to the system if you enable the funcon.
Upload Picture Aer Linked Capture
Upload the pictures captured by linked camera to the plaorm automacally.
Save Pictures Aer Linked Capture
If you enable this funcon, you can save the picture captured by linked camera to the device.
Upload Thermographic Picture
Upload thermographic picture captured to the plaorm automacally.
Save Thermographic Picture
If you enable this funcon, you can save the thermographic picture captured to the device.
Clear All Pictures in Device
Note
All pictures cannot be restored once they are deleted.
Clear Registered Face Pictures
All registered pictures in the device will be deleted.
Clear Captured Pictures
All captured pictures in the device will be deleted.
Set Card
Authencaon Parameters
Set the card reading content when authencate via card on the device.
Go to Conguraon → Access Control → Card Authencaon Sengs .
Select a card
authencaon mode and click Save.
Full Card No.
All card No. will be read.
Wiegand 26 (3 bytes)
DS-K5671-3XF Series Face Recognion Terminal User Manual
86