Data Sheet


* In order to get an accurate temperature, after the device is powered on, you should wait for 90 min to warm the
device up.

* Biometric recognition products are not 100% applicable to anti-spoofing environments. If you require a higher
security level, use multiple authentication modes.

Specification
Temperature measurement
Temperature range
30 °C to 45 °C (86 °F to 113 °F)
Sensor
Vanadium Oxide uncooled sensor
Resolution
120 × 160
Frame rate
25 fps
Measuring accuracy
0.1
°
C
Measuring deviation
± 0.5 °C, without black body calibration
Measuring distance
0.3 to 2 m
Screen
Size
7-inch
Type
Touch screen
Camera
Pixel
2 MP
Lens
Dual-lens
Network
Wired network
Support, 10/100/1000 Mbps self-adaptive
Wi-Fi
Support
Interface
Network interface
1
RS-485
1
Wiegand
1
Lock output
1
Exit button
1
Door contact input
1
TAMPER
1
Capacity
Face capacity
50,000
Event capacity
100,000
Authentication
Face recognition duration
＜
0.2 s per person
Face recognition distance
0.3 to 2 m
Function
Face anti-spoofing
Support
Audio prompt
Support
Others
Power supply
12 VDC/2 A
Working temperature
0 °C to 50 °C (32 °F to 122 °F)
For temperature measurement: 10 °C to 35 °C (50 °F to 95 °F)
Working humidity
10 to 90% (No condensing)
Application environment
Indoor and windless environment use only