User Manual

6.11 Time and Aendance Status Sengs
Set me and aendance status. You can set the aendance mode as check in, check out, break
out, break in, overme in, and overme out according to your actual situaon.
Note
The funcon should be used cooperavely with me and aendance funcon on the client
soware.
6.11.1 Disable Aendance Mode via Device
Disable the aendance mode and the system will not display the aendance status on the inial
page.
Tap T&A Status to enter the T&A Status page.
Figure 6-17 Disable
Aendance Mode
Set the Aendance Mode as Disable. And tap .
You will not view or
congure the aendance status on the inial page. And the system will follow
the aendance rule that congured on the plaorm.
6.11.2 Set Auto
Aendance via Device
Set the aendance mode as auto, and you can set the aendance status and its available schedule.
The system will automacally change the aendance status according to the congured
parameters.
Before You Start
Add at least one user, and set the user's authencaon mode. For details, see User Management.
Steps
1. Tap T&A Status to enter the T&A Status page.
2. Set the Aendance Mode as Auto.
DS-K5604A-3XF Series Face Recognion Terminal User Manual
39