Data Sheet

DS-K5604A-3XF/V
Face Recognition Terminal
DS-K5604A-3XF/V face recognition terminal is a kind of
access control device integrated with temperature
screening function, which supports plug & play (rapid
deployment, free of wiring, installation, or configuration).
It can fast take skin-surface temperature, which can be
widely applied in multiple scenarios, such as enterprises,
stations, dwellings, factories, schools, campus and so on.

Plug & play: Supports rapid deployment. Free of wiring, installation, or configuration

Supports Vanadium Oxide uncooled sensor to measure target's temperature

Temperature measuring range: 30 °C to 45 °C (86 °F to 113 °F), accuracy: 0.1 ° C, deviation: ± 0.5 °C (without black
body calibration)

Recognition distance: 0.3 to 2 m

Fast temperature measurement mode: Detects face and takes temperature without identity authentication

Multiple authentication modes are available

Face mask wearing alert: If the recognizing face does not wear a mask, the device will prompt a voice reminder. At the
same time, the authentication or attendance is valid.

Displays temperature measurement results on the authentication page

Forced mask wearing alert: If the recognizing face does not wear a mask, the device will prompt a voice reminder. At
the same time, the authentication or attendance will be failed

Triggers voice prompt when detecting abnormal temperature

Configurable door status (open/close) when detecting abnormal temperature

Transmits online and offline temperature information to the client software via TCP/IP communication and saves the
data on the client software

Integrated design with stand bracket

Communicates with the third-party turnstile via IO output or Wiegand

Adjustable supplement light brightness

High performance processor with deep learning algorithm

50,000 face capacity and 100,000 event capacity

Face recognition duration
＜
0.2 s/User; face recognition accuracy rate ≥ 99%

Transmits and saves the comparison results and the captured pictures to the client software or others

NTP, manually time synchronization, and auto synchronization