User Manual

linkage between card number and linkage between card number and card password, card eecve
period, etc).
1. Click Access Control →
Authorizaon → Access Group to enter the Access Group interface.
2. Click Add to open the Add window.
3.
In the Name text eld, create a name for the access group as you want.
4. Select a template for the access group.
Note
You should congure the template before access group sengs. Refer to Congure Schedule
and Template for details.
5. In the le list of the Select Person eld, select person(s) to assign access authority.
6. In the
le list of the Select Access Point eld, select door(s), door staon(s) or oor(s) for the
selected persons to access.
7. Click Save.
You can view the selected person(s) and the selected access point(s) on the right side of the
interface.
Figure 7-5 Display the Selected Person(s) and Access Point(s)
8. Aer adding the access groups, you need to apply them to the access control device to take
eect.
1) Select the access group(s) to apply to the access control device.
2) Click Apply All to Devices start applying all the selected access group(s) to the access control
device or door
staon.
3) Click Apply All to Devices or Apply Changes to Devices.
Apply All to Devices
This
operaon will clear all the existed access groups of the selected devices and then
apply the new access group to the device.
Face Recognion Terminal User Manual
75