User Manual

If you enable this funcon, the captured pictures will be saved.
3. Click Save.
7.12.13 Set Face Recognion Terminal Parameters
Click Maintenance and Management → Device to enter the device list.
Press CTRL and click to enter the remote conguraon page.
Click Other → Face
Recognion Terminal Parameters and you can congure the device
parameters.
Face Picture Database
Select Deep Learning as the face picture database.
Save Authencang Face Picture
If enabled, the captured face picture when authencang will be saved on the device.
CPU Card Reading
Select to read card No. or le.
Work Mode
Set the device work mode as Normal Mode. You should authencate your credenal for
accessing.
ECO Mode
Aer enabling the ECO mode, the device will use the IR camera to authencate faces in the low
light or dark environment. And you can set he ECO mode threshold, ECO mode (1:N), and ECO
mode (1:1).
ECO Mode (1:1)
Set the matching threshold when
authencang via ECO mode 1:1 matching mode. The larger
the value, the smaller the false accept rate and the larger the false rejecon rate.
ECO Mode (1:N)
Set the matching threshold when
authencang via ECO mode 1:N matching mode. The larger
the value, the smaller the false accept rate and the larger the false rejecon rate.
ECO Mode Threshold
When enabling the ECO mode, you can set the ECO mode’s threshold. The larger the value, the
easier the device entering the ECO mode. Available range: 0 to 8.
Click Save to save the
sengs.
7.12.14
Congure Face Picture Parameters
Steps
1. Click Maintenance and Management → Device to enter the device list.
2. Click
to enter the remote conguraon page.
Face Recognion Terminal User Manual
131