User Manual

7.10.3 Search Historical Events
In the Event Search module of the event center page, you can search the historical events via me,
device type, and other condions according to the specied device type, and then process the
events.
Before You Start
Enable receiving events from devices before the client can receive event informaon from the
device,see Enable Receiving Event from Devices for details.
Steps
1. Click Event Center → Event Search to enter the event search page.
2. Set the
lter condions to display the required events only.
Time
The
me when the event starts.
Search by
Device
Search the events by device or the device's resource channels. If searched by device, you
need to set the followings:
• Include Sub-Node: Search the events of the device and all resource channels.
• Device Type: Select the device from which you want to search events.
Group
Search the events by resource channels in the group.
Note
• For video intercom device, you need to select search scope: All and Locking Log.
• For access control device, you can click Show More to set more
condions: status,
event type, card reader type, person name, card No., and organizaon.
Priority
The priority including low, medium, high and uncategorized which indicates the emergency
degree of the event.
Status
The handling status of the event.
3. Click Search to search the events according the condions you set.
Face Recognion Terminal User Manual
103