Quick Start Guide

Face Recognition Terminal
Quick Start Guide
UD19290B-A
© 2020 Hangzhou Hikvision Digital Technology Co., Ltd. All rights reserved.
This Manual is the property of Hangzhou Hikvision Digital Technology Co., Ltd. or its affiliates (hereinaer
referred to as “Hikvision”), and it cannot be reproduced, changed, translated, or distributed, parally or
wholly, by any means, without the prior wrien permission of Hikvision. Unless otherwise expressly stated
herein, Hikvision does not make any warranes, guarantees or representaons, express or implied,
regarding to the Manual, any informaon contained herein.
About this Manual
The Manual includes instrucons for using and managing the Product. Pictures, charts, images and all other
informaon hereinaer are for descripon and explanaon only. The informaon contained in the Manual is
subject to change, without noce, due to firmware updates or other reasons. Please find the latest version
of this Manual at the Hikvision website (hps://www.hikvision.com/).
Please use this Manual with the guidance and assistance of professionals trained in supporng the Product.
Trademarks Acknowledgement
and other Hikvision’s trademarks and logos are the properes of Hikvision in various
jurisdicons.
Other trademarks and logos menoned are the properes of their respecve owners.
LEGAL DISCLAIMER
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THIS MANUAL AND THE PRODUCT DESCRIBED,
WITH ITS HARDWARE, SOFTWARE AND FIRMWARE, ARE PROVIDED “AS IS” AND “WITH ALL FAULTS AND
ERRORS”. HIKVISION MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION,
MERCHANTABILITY, SATISFACTORY QUALITY, OR FITNESS FOR A PARTICULAR PURPOSE. THE USE OF THE
PRODUCT BY YOU IS AT YOUR OWN RISK. IN NO EVENT WILL HIKVISION BE LIABLE TO YOU FOR ANY SPECIAL,
CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS
OF BUSINESS PROFITS, BUSINESS INTERRUPTION, OR LOSS OF DATA, CORRUPTION OF SYSTEMS, OR LOSS OF
DOCUMENTATION, WHETHER BASED ON BREACH OF CONTRACT, TORT (INCLUDING NEGLIGENCE), PRODUCT
LIABILITY, OR OTHERWISE, IN CONNECTION WITH THE USE OF THE PRODUCT, EVEN IF HIKVISION HAS BEEN
ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR LOSS.
YOU ACKNOWLEDGE THAT THE NATURE OF INTERNET PROVIDES FOR INHERENT SECURITY RISKS, AND
HIKVISION SHALL NOT TAKE ANY RESPONSIBILITIES FOR ABNORMAL OPERATION, PRIVACY LEAKAGE OR
OTHER DAMAGES RESULTING FROM CYBER-ATTACK, HACKER ATTACK, VIRUS INSPECTION, OR OTHER
INTERNET SECURITY RISKS; HOWEVER, HIKVISION WILL PROVIDE TIMELY TECHNICAL SUPPORT IF REQUIRED.
YOU AGREE TO USE THIS PRODUCT IN COMPLIANCE WITH ALL APPLICABLE LAWS, AND YOU ARE SOLELY
RESPONSIBLE FOR ENSURING THAT YOUR USE CONFORMS TO THE APPLICABLE LAW. ESPECIALLY, YOU ARE
RESPONSIBLE, FOR USING THIS PRODUCT IN A MANNER THAT DOES NOT INFRINGE ON THE RIGHTS OF
THIRD PARTIES, INCLUDING WITHOUT LIMITATION, RIGHTS OF PUBLICITY, INTELLECTUAL PROPERTY RIGHTS,
OR DATA PROTECTION AND OTHER PRIVACY RIGHTS. YOU SHALL NOT USE THIS PRODUCT FOR ANY
PROHIBITED END-USES, INCLUDING THE DEVELOPMENT OR PRODUCTION OF WEAPONS OF MASS
DESTRUCTION, THE DEVELOPMENT OR PRODUCTION OF CHEMICAL OR BIOLOGICAL WEAPONS, ANY
ACTIVITIES IN THE CONTEXT RELATED TO ANY NUCLEAR EXPLOSIVE OR UNSAFE NUCLEAR FUEL-CYCLE, OR IN
SUPPORT OF HUMAN RIGHTS ABUSES.
IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE LATER PREVAILS.
Data Protecon
During the use of device, personal data will be collected, stored and processed. To protect data, the
development of Hikvision devices incorporates privacy by design principles. For example, for device with
facial recognion features, biometrics data is stored in your device with encrypon method; for fingerprint
device, only fingerprint template will be saved, which is impossible to reconstruct a fingerprint image.
As data controller, you are advised to collect, store, process and transfer data in accordance with the
applicable data protecon laws and regulaons, including without limitaon, conducng security controls to
safeguard personal data, such as, implemenng reasonable administrave and physical security controls,
conduct periodic reviews and assessments of the effecveness of your security controls.
Scan the QR code to get the user manual for detailed informaon.
Note that mobile data charges may apply if Wi-Fi is unavailable.
Use only power supplies listed in the user instrucons:
Model Manufacturer Standard
C2000IC12.0-24P-DE
C2000IC12.0-24P-GB
MOSO Power Supply Technology Co., Ltd.
CEE
MOSO Power Supply Technology Co., Ltd.
BS
ADS-24S-12 1224GPG Shenzhen Honor Electronic Co., Ltd. CEE
GroundBottom Cover
Bracket
Bottom Screw
M6×65 Expension Bolt
1
2
3
Before you start: Make sure the ground surface has drilled
holes for device installation.
Steps:
1. Remove the two bottom screws (2-SC-KM3×5B-JMF) on
both sides of the bottom cover. And remove the bottom
cover.
2. Align the device with the drilled holes on the ground and
insert 3 supplied expension bolts (M6×65). Make sure the
expension bolts are higher than the ground.
3. Secure the expension bolts with nuts。
4. Install the bottom cover back on the device with 2 bottom
screws.
The actual device
appearance varies
according to
different models.
The device should be installed on the concrete surface or other
non-flammable surfaces.
The device supports plug & play. You can put the device on the
ground and start operation after powering on.
2
Installation
The figures are for reference only.
The Wiegand terminal here is a Wiegand input terminal. You should set
the device’s Wiegand direction to “Input”. If you should connect to
an access controller, you should set the Wiegand direction to “Output”.
For details, see the user manual.
The power supply should be 12 VDC/2 A.
IN2
Yellow/Orange
Yellow/Blue
Yellow/Purple
Purple
Grey
Orange
Brown
White
Green
Yellow/Brown
Power
Yellow/Red
(NC)
(NO)
Yellow/Black
Alarm Input Device
Alarm Output Device
Alarm Output Device
A3
A1
A2
A4
A5
A6
B1
B2
B3
B4
B5
B6
WG_OK
WG_ERR
BUZZER
12 V
Power Supply
Wiegand
Card Reader
Wiegand
Alarm Input
Alarm Output
Tag 2
Tag 4
Tag 2Tag 4
RS-485 Network Interface Debugging Port (For Debuggin Only) Door Lock Interface Wiegand Alarm Input/Output Power Input USB Interface
Device
The wiring diagram of tag 2 and 4 on the left is shown below:
Installaon Environment:
If installing the device indoors, the device should be at least 2 meters
away from the light, and at least 3 meters away from the window.
Make sure the environment illuminaon is more than 100 Lux.
Indoor and windless environment use only
Direct Sunlight
Direct Sunlight
through Window
Indirect Sunlight
through Window
Backlight
10Lux ＞1200Lux100~850Lux
3m
2m
Close to Light
1
Appearance
3.1
Device Wiring (Normal)
165 mm
1398.95 mm
172 mm
250.71 mm
46 mm
144.71 mm
37 mm
185.91 mm
1347.28 mm
Touch Screen
IR Light
IR Light
Camera
White Light
Thermographic
Module
69.96 mm