User Manual

Before You Start
Set the card permission and apply the permission sengs to the access control device. For details,
refer to Assign Permission to Person .
Perform this task when you want to set
authencaons for mulple cards of one access control
point (door).
Steps
1. Click Access Control → Advanced
Funcon → Mulple Authencaon to enter the Mulple
Authencaon page.
2.
Select an access control device in the list of Controller List panel.
3. Add a card group for the access control device.
1) Click Add on the Set Card Group panel.
2) Create a name for the group as desired.
3) Specify the start
me and end me of the eecve period for the card group.
4) Select card(s) to add to the card group.
5) Click OK.
4. Select an access control point (door) of selected device on the Set
Authencaon Group panel.
5. Input the
me interval for card swiping.
6. Add an authencaon group for the selected access control point.
1) Click Add on the Set
Authencaon Group panel.
2) Select a congured template for the authencaon group from the drop-down list.
Note
For seng the template, refer to Congure Schedule and Template .
3) Select the authencaon type as Local Authencaon, Local Authencaon and Remotely
Open Door, or Local
Authencaon and Super Password from the drop-down list.
Local Authencaon
Authencaon by the access control device.
Local Authencaon and Remotely Open Door
Authencaon by the access control device and by the client. When the person swipes
the card on the device, a window will pop up. You can unlock the door via the client.
Figure 8-3 Remotely Open Door
Access Controller User Manual
79