User Manual

6.
Oponal: If applying individual authencaon mode failed, click Failed Applicaon to view
details. Select an applying status from the list and click Apply Again to apply the person's
authencaon mode again to the device.
Congure Card Reader Authencaon Mode and Schedule
You can set the passing rules for the card reader of the access control device according to your
actual needs.
Perform this task if you need to
congure the card reader's authencaon mode and schedule.
Steps
1. Click Access Control → Advanced Funcon → Card Reader Authencaon to enter the card
reader
authencaon conguraon page.
2. Select a card reader on the le to congure.
3. Set card reader authencaon mode.
1) Click Conguraon.
Note
• Password refers to the card password set when issuing the card to the person. For details,
refer to Add Single Person.
• Authencaon password refers to the password set to open the door. Refer to Congure
Authencaon Password.
• The supported card reader
authencaon mode varies according to dierent devices. For
details, refer to the actual product.
2) Select the modes and click to add to the selected modes list.
3)
Oponal: Click or to adjust the display order.
4) Click OK.
Aer selecng the modes, the selected modes will display as icons.
4. Click the icon to select a card reader
authencaon mode, and drag on the day to draw a color
bar on the schedule, which means in that period of me, the card reader authencaon is valid.
5. Repeat the above step to set other
me periods.
6. Oponal: Select a congured day and click Copy to Week to copy the same sengs to the
whole week.
7.
Oponal: Click Copy to to copy the sengs to other card readers.
8. Click Save.
Congure
Mulple Authencaon
You can manage the cards by group and set the authencaon for mulple cards of one access
control point (door).
Access Controller User Manual
78