User Manual

1. Click Access Control → Permission to enter the Permission Management interface.
2. Click Add to open the adding permission window.
3. In the Permission Name text
eld, create a name for the permission as you want.
4. Select a schedule template for the permission.
Note
You should congure the template before permission sengs. You can click Add Template to
add the template. Refer to Congure Schedule and Template for details.
5. In the Person list, select person(s) to assign the permission and click > to add to the Selected
Person list.
6. In the Access Control Point/Device list, select door(s) or door
staon(s) for the selected persons
to access and click > to add to the selected list.
7. Click OK.
The selected persons will have the permission to enter/exit the selected doors/door
staons
with their linked card(s) or ngerprints.
8. Aer adding the access permissions, you need to apply them to the access control device to
take eect.
1) Select the permission(s) to apply to the access control device.
To select mulple permissions, you can hold the Ctrl or Shi key and select permissions.
2) Click Apply All to start applying all the selected permission(s) to the access control device or
door
staon.
Note
You can also click Apply Changes to apply the changed part of the selected permission(s) to
the device(s).
Search Assigned Permission
Aer adding the access permissions, you can search the exisng permissions by seng the search
condions.
Perform this task if you need to search the assigned access permission.
Steps
1. Click Access Control → Permission to enter the Permission Management interface.
2. Click Advanced Search to open the search window.
3. Set the search
condion.
Person No.
Input the keyword of the person number.
Person Name
Input the keyword of the person name.
Access Controller User Manual
71