User Manual

Note
There are two default week schedules: Whole Week Schedule and Blank Schedule, and they
cannot be edited or deleted.
Whole Week Schedule
Card swiping is valid on each day of the week.
Blank Schedule
Card swiping is invalid on each day of the week.
2. Add a week schedule.
1) Click Add Week Schedule to open the Add Week Schedule dialog.
2) Input a desired name in the Week Schedule Name
eld.
3) Click OK to add the week schedule.
3. Click the added week schedule in the le list to show its property on the right.
4. Select a day of the week and draw me periods on the meline bar.
Note
Up to 8 me periods can be set for each day in the week schedule.
5. Oponal: Perform one of the following operaons to edit the drawn me periods.
-
Move the cursor to the me period and drag the me period on the meline bar to the
desired posion when the cursor turns to .
-
Click the
me period and directly edit the start/end me in the appeared dialog.
-
Move the cursor to the ends of me period and drag to lengthen or shorten the me period
when the cursor turns to .
6.
Oponal: Aer seng the me schedule, you can do one or more of the following operaons.
Delete Day Schedule
Select a day and click Delete Duraon to delete the schedule of the
selected day.
Clear Week Schedule Click Clear to delete the whole week schedule.
Copy to Whole Week Click Copy to Week to copy the schedule of this day to the whole
week.
7. Click Save to saving the sengs and nishing adding the week schedule.
Add Holiday Schdule
You can create a schedule for holidays and set the days in the holiday schedule, including start
date, end date, and holiday
duraon in one day.
Perform this task when you need to add a holiday schedule to pre-dene the holidays.
Steps
1. Click Access Control → Schedule and Template → Week Schedule to enter the Holiday Group
Management page.
Access Controller User Manual
68