User Manual

Report Card Loss
If the person lost his/her card, you can report the card loss so that the related access control
permission will be deleted.
Perform this task if you need to report the card loss for the person who lost his/her card.
Steps
1. Enter Access Control → Person and Card module.
2.
Oponal: Search the person you want to report card loss for.
Note
For searching the person, refer to Search Person Informaon .
3. Select the person and click Modify to open the Edit Person window.
4. Click
Credenal → Card tab to show the person's card informaon
5. Select the lost card and click Report Card Loss.
The card status will turn to lost.
6. Oponal: If the lost card is found, you can select the card and click Cancel Card Loss to cancel
the loss.
The card status will turn to normal.
7.
Oponal: If you have assigned access permission to the person, a window will pop up to nofy
you to apply the permission to the device again to take eect. You can click Apply Now or Apply
Later to apply the permission changes to the device.
Set Card Enrollment
Staon
The card enrollment staon can read the number of the card placed on it and show the card
number on the client.
Aer connecng a card enrollment staon to the PC running the client by
USB interface or COM, you need to set the card enrollment staon parameters before using it to
reading the card number.
When adding a card to one person, click Set Card Enrollment
Staon to open the Card Enrollment
Staon window.
The following parameters are available:
Type
Select the model of the connected card enrollment
staon
Note
Currently, the supported card enrollment staon models include DS-K1F100-D8, DS-K1F100-M,
DS-K1F100-D8E, and DS-K1F180-D8E.
Card Type
Access Controller User Manual
66