User Manual

Example
If the card quanty is 3, you can read or enter three card numbers for each person.
4) Set the eecve me and expiry me of the card.
4. In the Person(s) with No Card Issued list on the
le, select the person to issue cards.
5. Select the reading card mode and input the card number.
Access Controller Reader
Place the card on the reader of the Access Controller and click Read to get the card No.
Card Enrollment
Staon
Place the card on the Card Enrollment Staon and click Readto get the card No.
Note
The Card Enrollment Staon should connect with the PC running the client. You can click Set
Card Enrollment Staon to set the card enrollment staon's parameters. For details, refer to
Issue a General Card to Person.
Manually Input
Input the card No. manually and click Enter to input the card No.
Aer issuing the cards to the person, the person and card informaon will display in the
Person(s) with Card Issued list.
6. Click OK.
Search Person
Informaon
Aer adding the person informaon to the client, you can search the person by seng the search
condions.
It provides normal search and advanced search to search the person.
Normal Search
Aer adding the person informaon to the client, you can search the person by person name or
card number.
Perform this task if you want to search the person
informaon by person name or card number.
Steps
1. Enter Access Control → Person and Card module.
2. Set the search
condion.
-
To search the person by person name, input the keyword of the person name in the search
eld.
-
To search the person by card number, input the keyword of the card number in the search
eld manually, or click Read to read the card number from certain card by card enrollment
staon.
Access Controller User Manual
64