User Manual

Note
You can import all the channels of the device to the corresponding group by default.
8.
Oponal: Add the oine devices.
1) Check Add Oine Device.
2) Input the required
informaon, including the device channel number and alarm input
number.
3) Click Add.
When the
oine device comes online, the soware will connect it automacally.
9. Click Add to add the device.
Add
Mulple Online Devices
You can add mulple online devices to the client soware.
Perform this task if you need to add mulple online devices to the client soware.
Steps
1. Enter the Device Management module.
2. Click Device tab and select Hikvision Device as the device type to display the Online Device
area.
3. Click and hold Ctrl key to select
mulple devices.
Note
For the inacve device, you need to create the password for it before you can add the device
properly. For detailed steps, refer to Acvaon .
4. Click Add to Client to open the device adding window.
5. Input the required informaon.
User Name
By default, the user name is admin.
Password
Input the device password.
Cauon
The password strength of the device can be automacally checked. We highly recommend
you change the password of your own choosing (using a minimum of 8 characters, including
at least three kinds of following categories: upper case leers, lower case leers, numbers,
and special characters) in order to increase the security of your product. And we recommend
you reset your password regularly, especially in the high security system, reseng the
password monthly or weekly can
beer protect your product.
Access Controller User Manual
43