User Manual

Figure 8-10 Add Irregular Holiday
5. Set the holiday parameters.
Start Date
The rst day of the holiday.
Eecve Period
The years during which the holiday's start date will take eect. For example, if the holiday's
eecve period is set as 2018 to 2019, and the start date is set as December 31st, and the
numbers of days is 3, then the holiday will be 2018/12/31 to 2019/01/02, 2019/12/31 to
2020/01/02.
Note
If one holiday crosses two years and the eecve period
6. Click OK.
7. Oponal: Aer adding the holiday, perform one of the following operaons.
Edit the holiday
informaon.
Delete the holiday from the holiday list.
Congure Leave Type
You can customize the leave type according to actual needs. By default, there are three major leave
types: Leave, Day O in Lieu, and Go Out on Business.
Perform the following steps to add, edit, or delete the leave type.
Steps
1. Enter the Time and
Aendance module.
2. Click Advanced Sengs → Leave Type Sengs to enter the Leave Type Sengs page.
3. Click
to add a major leave type on the le panel.
4. Oponal: Perform one of the following operaons for major leave type.
Edit the major leave type.
Delete the major leave type.
Access Controller User Manual
119