User Manual

Figure 8-9 Add Regular Holiday
5. Set the holiday parameters.
Start Date
The rst day of the holiday.
Eecve Period
The years during which the holiday's start date will take eect. For example, if the holiday's
eecve period is set as 2018 to 2019, and the start date is set as December 31st, and the
numbers of days is 3, then the holiday will be 2018/12/31 to 2019/01/02, 2019/12/31 to
2020/01/02.
6. Click OK.
7.
Oponal: Aer adding the holiday, perform one of the following operaons.
Edit the holiday
informaon.
Delete the holiday from the holiday list.
Add Irregular Holiday
You can congure a holiday which will take eect annually on irregular days during the eecve
period, such as Bank Holiday.
Perform this task if you want to add an irregular holiday.
Steps
1. Enter the Time and Aendance module.
2. Click Advanced
Sengs → Holiday Sengs to enter the Holiday Sengs page.
3. Click to pop up the Add Holiday window.
4. Click Irregular Holiday tab.
Access Controller User Manual
118