User Manual

3. Click Add to enter Add Time Period page.
4. Set the
me period related parameters.
Aend at Least
Set the minimum aendance me.
Note
If you have congured the dierent card readers as start-work and end-work check points,
you can check Absence me is not included in eecve work hours to exclude the absence
me from the work hours.
Check-in / Check-out Required
Check the checkboxes and set the valid period for check-in or check-out.
Mark as Late/Mark as Early Leave
Set the me period for late or early leave.
Exclude Break Period from Work Duraon
Check the checkbox and set the break period excluded.
Note
Up to 3 break periods can be set.
Set as Pay-per-Time Period
Check the checkbox and set the pay rate and minimum me unit.
5. Click Save.
The added
me period lists on the le panel of the window.
Add
Shi
You can add the shi for the shi schedule.
Before You Start
Add a me period rst. See Add Time Period for details.
Perform this task when you need to add shi.
Steps
1. Enter Time and Aendance module.
2. Click
Shi Schedule Management → Shi Sengs → Shi to enter Shi Sengs window.
3. Click Add to enter Add Shi page.
4. Input the name for
shi.
5. Select the shi period from the drop-down list.
6. Select the added me period and click on the me bar to apply the me period.
7. Click Save.
The added
shi lists on the le panel of the window.
Access Controller User Manual
108