User Manual

HTTP
Set the HTTP port, DNS1 server address, and DNS2 server address.
8.2.3 Report Strategy Sengs
You can set the center group for uploading the log via the EHome protocol.
On the Device for Management page, click Remote
Conguraon → Network → Report Strategy
to enter the Report Strategy Sengs tab.
You can set the center group and the system will transfer logs via EHome protocol. Click Save to
save the
sengs.
Center Group
Select a center group from the drop-down list.
Main Channel/Backup Channel
The device will communicate with the center via the main channel. When excepon occurs in
the main channel, the device and the center will communicate with each other via the backup
channel.
Note
• N1 refers to wired network and G1 refers to GPRS.
• Only device with 3G/4G
funcon supports seng the channel as G1.
8.2.4 Network Center Parameters Sengs
You can set the nofy surveillance center, center's IP address, the port No., the protocol (EHome),
the EHome account user name,etc. to transmit data via EHome protocol.
On the Device for Management page, click Remote
Conguraon → Network → Network Center
Parameters to enter the Network Center Parameters
Sengs tab.
Select a center from the drop-down list.
Aer enabling the funcon, you can set the center's address type, IP address/domain name, and
port No., create EHome user name, etc.
Note
If set the EHome type as EHome5.0, you should create an EHome key as well.
Click Save.
Aer creang the EHome informaon, you can add the device via EHome protocol.
Access Controller User Manual
104